Hot sell industrial exhaust dust control system at melting furnace YKMC-400

Pulse Jet  Baghouses  Dust Collector  are the most common and most efficient type of dust collector. Within a baghouse dust collector, a fan creates a vacuum, forcing contaminated air through fabric filters located in a bag. The fabric filters catch the particles, allowing clean air to exit the machine’s outlet while dust particles settle to the bottom of the machine’s chamber. The most common variations of baghouse dust collectors are distinguished by the method they use to clean the filter bags. They include shaker dust collectors, which physically shakes filter bags at intervals to remove dust buildup, reverse air dust collectors, which temporarily reverse air flow within the dust collector to reduce dust buildup, and jet dust collectors, which utilize jets of air to reduce dirt buildup in the fabric filters.

YKQM bag house dust collector is a new type of dust collector with high efficiency at international levels. It combines the advantages of sub-room reverse flow and jet pulse bag house together, which over-comes the weakness of low strength of dedusting, the defects of cleaning dust and filtering which causes dust absorption twice for expanding the application range of bag filter. The collector adopts efficient offline cleaning, which leads to high effectiveness, long service life of filter bag, low resistance, and so on. It is widely used in building materials, metallurgy, chemical industry for purifying dust.
This collector is outdoor type formed by different chambers and filter bag in several kinds of types, which are 32, 64, 96 and 128 etc. The diameter of filter bag is Φ130mm and length 2450mm or 3060mm. Discharging concentration could be less than 20mg/Nm³ if concentration of collecting dust is less than 1000g/Nm³. When outside temperature is less than or equal to
5-25 , the heating device should be installed.

Main features

1.Cleaning dust offline and effectiveness is about to 99.9%. The dust collector has no secondary absorption, specially good when used for handling high concentrated gas.

2.Use reverse blowing in high temperature to prevent condensation effectively.

3.Use new materials for cleaning dust. It can adapt to various conditions.

4.Because of automatic control, the machine is easy to be operated with good reliability.

5.The dust collector is with air box, which avoids partial damage inconvenient installation.