During the dust gas goes into middle box and under box, the dust can be attached to filter bag and outgoing gas after going through venture and upper box. With the increasing of dust, press loss for dust bag is increased, which will fed back to controller. Receiving and issuing commands, the controller will touch off every pulse valve to make gas erupts from each jetting hole, then pass a venture tube and spray into corresponding filter bag. The filter bag expands rapidly under instantaneous reaction of airflow, dust fallen off of the filter bag, so the filter bag can be recycled.

The baghouse filter is composed and configured on the base of type of use and the specific requirements of the client. The Pulse Jet Cleaning System is managed by a PLC with a sensor that reads the pressure drop of the filtering elements encouraging minor compressed air consumption and greater duration of the bags. The pre-chamber recovers the biggest powder particles, safeguarding the baghouses from excess loads of pollutants and guaranteeing longer duration. The hopper includes a screw conveyor and rotary valves to continuously unload the filtered powder. The ladder and the railings allow convenient access to the roof of the filter to change and maintain the filtering parts.