Best sell automatic sampler ore on belt conveyor

Introduce:

It takes complete cross section of sample from moving conveyor belt; it consists of motor

,speed reducer ,rotating sample cutter,approaching switch, frame and casing and so on .

The equipment is manufactured in accordance with standard of GB/T475-2008 and

standard GB/T10355.1-2000.

Typical applications

Widely used in steel plants,power plants, coal mines and other industries for continuous

transportation of bulk materials, to achieve full-section automatic random sampling,

eliminatehuman interference. It can sample quickly, with simple structure and reliable

operation.

Features

1.Belt width:400-2000mm

2.It cuts the complete cross-section of the stream at uniform speed,the samples are even;

3.The equipment is reliable and easy to be installed and operated;

4.It avoid the effect of the human factor to the material,which can make sure the sample

isaccurate with high representativeness and scientificity;

5.Both manual and automatic operation is available,which reduces the labor intensity

and insures personnel safety.

Control mode

The sampler is divided into two states: local control and remote control.

In local control state is divided into local manual control mode and local

automatic control mode.

Local manual control mode 

The “local/remote” selection switch is switched to the local position,

and the “automatic/manual” selection switch is switched to the manual position.

The sampler is in the local manual control mode.

In this mode, the “point/sample/linkage” three-knob is switched to the point position,

and the “sampling start” button is pressed. At this time, the sampler point start-up.

This mode is used for the installation and debugging of the sampler

Local automatic control mode

In this mode, the sampler is in the local automatic control mode, in which the sampler

takes sample according to the sampling interval set by the timer, automatically sampled

when reach the time interval.

 Remote control mode 

The “on-site/remote” selection switch is rotated to a remote position and the “automatic/manual”

selection switch is on an automatic position, where the sampler is in a remote automatic

control mode.